VEDALI HARDWARE CO., LTD
VEDALI HARDWARE CO., LTD Professional Hardware Supplier Perfect Engineering Solutions
Add to Cart
Injection Molded Plastic Washer Bushing 45mm Oyster Double Round Body Design
Special plastic injection molding fixing washer bushing has a double round body design that smaller one is placed in bigger one and both are connected by four bars , there is a hole in middle of bar for further fixing purpose when it is assembled with other pieces .
Plastic injection molding fixing washer bushing is made from nylon PA with grade 66 , this material is quite good for high requirements on assembly and use conditions .
Low friction and good self-lubricant for a long service
Wide working temperature from -30℃ to 150℃ for the most areas with different climate .
Colorful choices for many demands
Specification for Plastic injection molding fixing washer bushing
Outside diameter : 30 mm
Small round diameter: 25 mm
Height : 10 mm
Note : we accept customized sizes for different design on construction
Physical Performance for Plastic injection molding fixing washer bushing
| Density ( g/cm3) | 1.14 |
| Water absorption % | 3 |
| Shrinkage % | 1～2 |
Mechanical Property for Plastic injection molding fixing washer bushing
| Tensile strength MPa | 60～80 |
| Elongation at break % | 2.2 |
| Bending strength MPa | 100～120 |
| Modulus of elasticity for bending MPa | 2000 ～3000 |
| Notched Impact Strength(J/m) | 60～100 |
| HR hardness | 118 |
Thermal Performance for Plastic injection molding fixing washer bushing
| Normal working temperature ℃ | 80～120 |
| Brittle temperature ℃ | -30℃ |
| Melting temperature ℃ | 252 |
| Pyrogenic decomposition temperature ℃ | 350℃ |
| Matin heatproof ℃ | 50～60 |
Electrical Performance for Plastic injection molding fixing washer bushing
| Dielectric constant | 1.63 |
| Arc resistance sec | 130～140 |
| Specific volume resistance Ω·cm | 1.83×1015 |
| dissipation factor | 100～400 |
| Dielectric strength(kV/mm) | 20～30 |
Features for Plastic injection molding fixing washer bushing
Wear resistance
Good self-lubricant
Resistant high temperature
Normally , the part can be operated smoothly at temperature 150℃ and thermal deformed temperature is up to 250℃ when parts with glass fiber .
Perfect elongation
Elongation at break is 2.2% according to ISO 527 testing method .
Corrosion resistance
Good insulation
Specific volume resistance is 1.83×1015 and resistance to high breakdown voltage support part to be good insulated .
Resistant impact
60 – 80 KJ/M2 normally .
Resistant fire
Generally , the fire resistance is UL94V-2 and UL64V-0 for special parts .
Resistance to low temperature
Parts can be workable at -30℃
Environment friendly
Parts meet RoHS or REACH environmental production standard .
We manufacture different plastic injection molding or molded parts with materials cover PA ,ABS ,PC ,PMMA ,PVC and PE etc , and we can provide Customization service with good quality ; Small MOQ is accept .