VEDALI HARDWARE CO., LTD
VEDALI HARDWARE CO., LTD Professional Hardware Supplier Perfect Engineering Solutions
Add to Cart
Precision Metal Stamping Parts Polished Stainless Steel Motor Support
Stainless steel support stamping parts are stamped a plate socket and bended a clip in strip , bended upper section to fix or secure support stamping part on object and supporting socket with flat panel is used to support something of motor .
Material
Support stamping parts are made of high tensile strength stainless steel 18-8 that with good performance or properties .
|
Tensile strength σb (MPa) |
535 |
|
Yield Strength σs (MPa) |
210 |
|
Elongation δ5 (%) |
50 |
|
Reduction of area ψ (%) |
65 |
Mechanical property of support stamping parts
|
Fusing point(℃) |
1398 to 1454 |
|
Specific heat capacity(0~100℃,KJ·kg-1K-1) |
0.5 |
|
Heat conductivity(W·m-1·K-1) |
(100℃)16.3 ,(500℃)21.5 |
Thermal performance of support stamping parts
|
Resistivity(20℃,10-6Ω·m) |
0.73 |
Electrical performance of support stamping parts
Dimensions
Length : 25 mm
Width : 25 mm
Height : 15 mm
Thickness : 0.8 mm
Chamfer : 0.5 x 45°
Note : we accept customized sizes from 0.5 mm to 5 m for different designs .
Tolerance
+/-0.1 mm for normal sizes , and refer to following tolerances standard for unspecified sizes .
| Normal Size | Thickness | |||
| FM | TO | FM | TO | m |
| 0.5 | 3 | — | 1 | ±0.10 |
| 1 | 3 | ±0.20 | ||
| 3 | 6 | — | 1 | ±0.15 |
| 1 | 4 | ±0.30 | ||
| 4 | — | ±0.40 | ||
| 6 | 30 | — | 1 | ±0.20 |
| 1 | 4 | ±0.40 | ||
| 4 | — | ±0.60 | ||
| 30 | 120 | — | 1 | ±0.30 |
| 1 | 4 | ±0.55 | ||
| 4 | — | ±0.80 | ||
| 120 | 400 | — | 1 | ±0.35 |
| 1 | 4 | ±0.70 | ||
| 4 | — | ±1.05 | ||
| 400 | 1000 | — | 1 | ±0.50 |
| 1 | 4 | ±1.00 | ||
| 4 | — | ±1.45 | ||
| 1000 | 2000 | — | 1 | ±0.65 |
| 1 | 4 | ±1.30 | ||
| 4 | — | ±2.00 | ||
| 2000 | 4000 | — | 1 | ±1.00 |
| 1 | 4 | ±2.00 | ||
| 4 | — | ±2.60 | ||
Characteristics
Stainless steel support stamping parts for motor have high tensile strength and good performance to meet continuous high-load working .
◆ High tensile strength
Tensile strength is up to 535 σb (MPa) and more higher after heat treatment .
◆ Perfect elongation
50 δ5 (%) to ensure support stamping parts have enough elongation under heavy load and pressure . .
◆ Hard material
Support stamping parts are made of stainless steel 18-8 that hardness is HRC 72 or so .
◆ Resistance to corrosion
Stainless steel 18-8 with good performance on anti-corrosion by itself . normally , not to be rusted in 5 years inside conditions .
◆ Non-magnet
Its nearly no magnet for stainless steel 18-8 support stamping parts .
Finish
Polishing for support stamping parts