VEDALI HARDWARE CO., LTD
VEDALI HARDWARE CO., LTD Professional Hardware Supplier Perfect Engineering Solutions
Add to Cart
M12 Stainless Steel Machining Parts Simple Ball Head Bolt For Conversion Valve
Simple design with practicable purpose for conversation valve machined part, it has a big bal head for convenient operation by hand , there is threaded section length on the end length so that to be screwed into threaded hole and fixed , and in the middle of length is a shaft with bevel angle , the upper diameter is smaller than the bottom diameter , this design makes operation is more smooth .
Material for conversation valve machined part
Conversation valve machined part is made of stainless steel 303 with polished surface .
Chemical elements for conversation valve machined part
| C | Si | Mn | S | P | Mo | Cr | Ni |
| 0.15 | 1 | 2 | 0.15 | 0.2 | 0.6 | 18 | 9 |
Physical performance for conversation valve machined part
| Fusing point(℃) | 1290~1368 |
| specific heat capacity(0~100C,KJ·kg-1K-1) | 0.5 |
| Heat conductivity(W·m-1·K-1) | (100℃)15.5 |
| Resistivity(20,10-6Ω·m) | 0.73 |
Mechanical property for conversation valve machined part
| Tensile strength σb (MPa) | 550 |
| Yield Strength σs (MPa) | 210 |
| Elongation δ5 (%) | 50 |
| Reduction of area ψ (%) | 55 |
| Density g/cm3) | 7.98 |
Finish for conversation valve machined part
| Polishing | Grey | 0.01mm ( reference ) | Improving brightness of surface |
Dimensions for conversation valve machined part
| Ball diameter | 25 |
| Threaded section length | 20 |
| Threaded section diameter | M12 |
| Middle shaft length | 30 |
| Middle shaft diameter | 20mm and 10mm |
| Tolerance | +/-0.1 |
Unmarked tolerances for conversation valve machined part
Linear tolerances
| Level | 0.5-0.3 | 3-6 | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | 2000-40000 |
| f | ±0.05 | ±0.05 | ±0.1 | ±0.15 | ±0.2 | ±0.3 | ±0.5 | - |
| m | ±0.1 | ±0.1 | ±0.2 | ±0.3 | ±0.5 | ±0.8 | ±1.2 | ±2 |
| c | ±0.2 | ±0.3 | ±0.5 | ±0.8 | ±1.2 | ±2 | ±3 | ±4 |
| v | - | ±0.5 | ±1 | ±1.5 | ±2.5 | ±4 | ±6 | ±8 |
Angle tolerances
| Level | 0-10 | 10-50 | 50-120 | 120-400 | Above 400 |
| f | ±1° | ±0°30' | ±0°20' | ±0°10' | ±5° |
| m | ±1° | ±0°30' | ±0°20' | ±0°10' | ±5° |
| c | ±1°30' | ±1° | ±0°30' | ±0°15' | ±0°10' |
| v | ±3° | ±2° | ±1° | ±0°30' | ±0°20' |
Features for conversation valve machined part
※ Bright surface
※ High Precision
※ Perfect fineness
※ No Burrs
※ Good corrosion resistance
※ Environmentally-friendly
※ Super materials
※ Strict dimensions
Other optional materials for conversation valve machined part
● Stainless steel
SUS430 ,SUS304 ,SUS316
● Alloy steel
GCr15,GCr15SiMn ,20Cr,20CrMnTi
● Titanium
TA1 ,TA2 , TA4 , T40 ,Ti1 , Ti2 ,Ti4