VEDALI HARDWARE CO., LTD
VEDALI HARDWARE CO., LTD Professional Hardware Supplier Perfect Engineering Solutions
Add to Cart
Hex Socket Cup Head Stainless Steel Self Tapping Screws UNF 5.5 Thread Fastener
High tensile strength cup head self tapping screws with self-tapping threads to drill wooden or metal and non-metal sheet without pre-drilling holes , sharp point with 30 degree .
Cup head self tapping screw has a hex socket and use a hex wrench to operate it ; Coarse full threads to the under head is intended to cut material more deep and secure well .
● No burrs
● Cost-effective
● Bright surface
● Eco-friendly
Material
Cup head self tapping screws are made of stainless steel with property class 18-8 which with good anti-corrosion performance
Chemical elements
| C | Si | Mn | S | P | N | Cr | Ni |
| 0.07 | 0.06 | 2 | 0.025 | 0.04 | 0.1 | 19 | 10.5 |
Physical performance
| Tensile strength ( σb (MPa) | 535 |
| Yield Strength σs (MPa) | 210 |
| Elongation δ5 (%) | 50 |
| Reduction of area ψ (%) | 65 |
| Density g/cm3) | 7.93 |
Specification
| Thread diameter | d | 5 |
| Thread length | L | 50 |
| Head height | H | 5 |
| Head diameter | D | 8.5 |
| Hex socket depth | 4 | |
| Hex socket width | 1.9 |
Note : all dimensions are millimeters
Finishing
| Finishing | Polish |
| Standard | RoHS ( 2002/95-EC ) |
| Thickness | 3 um |
| Color | Grey |
Advantages
★ Good ductility
★ Torsional resistance
★ High tensile strength
★ Corrosion resistance
★ Long service
★ Hard material
Applications
Stainless steel cup head self tapping screws are normally used to secure wooden and thin metal or non-metal sheets , especially for furniture ,ceiling board ,chipboard ,widows and doors .
Tips for use
1 . Drive cup head self tapping screw in hex wrench
2 . Operated by hand or electric drill
3 . A small locating point on sheet before drive screw .
4 . Do not strike stainless steel screw in hammer
Packing information for screws
| Size | 5 x 50 |
| Weigt kg / 1000 pcs | 8.5 |
| QTY / BOX | 500 |